Omron Automation Safety E3JM-10M4-G-N Through Beam Photoelectric Switch Sensor

Description

Omron Automation Safety E3JM-10M4-G-N Through Beam Photoelectric Switch Sensor
Product Descriptio
n：
Sensing method
Through-beam
Sensing distance
0 m to 10 m
Standard sensing object
Opaque 14.8 mm dia. Min.
Directional angle
Emitter:3 to 20 DEG
Receiver:3 to 20 DEG
Light source
Infrared LED (Emission wave length: 950nm)
Power supply voltage
12 to 240 VDC -10% to 10% (ripple(p-p) :10% Max.)
24 to 240 VAC -10% to 10%
Power consumption
Emitter and Receiver: 3W DC Max.
Emitter and Receiver:: 3W AC Max.
Control output (Output type)
Relay output
Control output (Load current)
0 to 3 A
Life expectancy (relay output)
Electrical: 100 thousand times or more(switching frequency 1800 times/hour)
Mechanical: 50 million times or more(switching frequency 18000 times/hour)
Operation mode
Light-ON/Dark-ON selectable
Load power supply voltage
5 VDC Min.
250 VAC Max.
Response time
30 ms Max.
Ambient illuminance
Incandescent lamp:3000 lux Max.
Ambient temperature
Operating: -25 to 55 ?
Storage: -30 to 70 ?
(withnoicingorcondensation)
Ambient humidity
Operating: 45 to 85% RH
Storage: 35 to 95% RH
(withnoicingorcondensation)
Insulation resistance
20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength
2000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection
IEC60529: IP66
Applicable standard (EC Directive (Low Voltage Directive))
EN60947-5-2
Applicable standard (EC Directive (EMC))
EMI: EN60947-5-2
Emission Enclosure: EN55011 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
Conformed standard (EC Directive (CE marking))
Equipped
Applicablestandard (CCC mark)
Equipped
Connection method
Terminal block models
Indicator
Light indicator(red), Power indicator(red)
Weight (packed state)
Approx. 270 g
Tightening torque
2 N.m Max. (with M4 screw)
Material (case)
ABS
Material (lens)
Methacrylate resin
Material (cover)
Polycarbonate
Material (mounting bracket)
Iron
Accessories
Instruction manual, Mounting bracket, Nut, Terminal protection cover, One set of cable connection nuts
Package Included:
1 x  Omron Automation Safety E3JM-10M4-G-N Through Beam Photoelectric Switch Sensor