Cartek Motorsport Electronics XR Battery Isolator Kit with Red Buttons

Description

Manufacturer:
Cartek Motorsport Electronics
Part Number:
CK-BR-08-R
Condition:
New
Product Description:
The Cartek Motorsport GT Battery Isolator is a very small and highly reliable alternative to the traditional mechanical master-switch. The unit has been designed to overcome all of the problems and restrictions associated with mechanical and electro/mechanical safety cut-outs. When fitted to a race car this solid state battery isolator simultaneously isolates the battery and kills the engine immediately when triggered in accordance with FIA safety regulations.
This system has been designed to simplify installation thereby saving time and reducing build costs.
Features
- Fully electronic with no moving parts
- Totally sealed against water and dirt
- Completely resistant to shock and vibration
- 0.5 second delay between transmitting the engine kill signal and disconnecting the battery allowing ECUs time to perform a shutdown sequence before electrical power is lost.
- Fully integrated with built in alternator run-down circuitry - No extra components required
- Driver operation by a single internal ON-OFF button/switch
- External operation by single or multiple 'strike' button(s)
- Buttons / switches connected to Isolator using light weight wiring
- Mounts close to battery for reduced cabling
- Very small and weighs just 70g
- Designed and manufactured in UK using high quality components
How it Works
The Cartek Battery Isolator GT provides two functions. The first is to disconnect the Battery from all Electrical Circuits. The second is to kill the engine.
Battery Isolation
Battery Isolators work by being fitted in between the negative side of the battery and the chassis. When the external kill button has been activated or the internal button been switched to the off state, then the Battery Isolator will disconnect the negative side of the battery from the Chassis. This means that no power can get to any of the electrical circuits as there is a break in the circuit.
Engine Kill
This unit does not have a power input or power output. Instead it sends a signal (12v 0.2a when on, switched to chassis/earth when off) which is wired up to either a Power Distribution Module or Motorsport ECU that has an ignition switch signal input. The ECU or Power Distribution Module will then shut down when it see???s this signal - which then kills the engine.
Built in Protection
The Cartek Battery Isolator XR comes with built in alternator run down protection meaning no extra wiring and no extra components.
How Is It Controlled?
The two electronic isolation circuits are controlled by microprocessors and incorporate various safety systems including over-temperature and over-current monitoring. These microprocessors also monitor the kill switches/buttons for instant activation without false triggering.
Kit Contents:
- Battery isolator XR
- 1 x 2M cable
- 1 x Internal button
- 1 x External button
- 1 x Safety stickers pack
Specifications
Size
L = 60mm, W = 45mm
Weight
70g
Battery negative terminal
M8 stud.
Electrical connector
Binder 09 0415 90 05
Connection cabled (supplied)
Binder 79 1456 272 05 (2 meter long)
Operational Voltage:
7v - 18v
Current consumption
25mA ON, 0mA OFF
Battery negative switching current
600A cranking, 2000A surge
Engine kill signal current
12v 0.5A when ON, switched to chassis/earth when OFF
Operating Temperature
-10 -+85 degrees C
Storage temperature
-40??C - +125??C
Additional Information:
Cartek XR Battery Isolator Kit with Red Buttons
Fully electronic, no moving parts and fully sealed
Dual driver and external operation possible
0.5 second delay between engine kill and ECU shutdown signal
Complete kit ready with red buttons
Guaranteed Fitments:
None
=============================================
SPARKTEC MOTORSPORTS EBAY STORE POLICIES
=============================================
Payment:
Click the Buy It Now button to safely and securely proceed to checkout. We accept all major credit cards and PayPal. The Sparktec Motorsports eBay Store requires immediate payment.
Sales Tax:
We are required to collect sales tax whenever applicable in accordance with marketplace facilitator laws.
Shipping:
ALL PRODUCTS IN THE SPARKTEC MOTORSPORTS EBAY STORE ARE IN STOCK AND READY TO SHIP! Orders will ship the same day or the following business day. FREE Standard Shipping within the contiguous United States. Any address outside of the contiguous United States, please contact Sparktec Motorsports for a shipping quote.
Processing begins as soon as an order has been placed, therefore we cannot change, cancel or modify orders once they have been confirmed. To return any unwanted items, please review our return policy for return and exchange instructions.
Delivery Time:
Once your order ships, please allow an additional 1-5 business days for delivery. Tracking information will be provided to you within 24 hours of shipping out. Because our products ship from warehouses and manufacturers across the US, exact shipping method and times will vary by item.
Customer Service:
To contact us with questions/comments, please e-mail us using the "Contact seller" link. Most e-mails are answered within 24 hours, including weekends and holidays.
Returns:
Sparktec Motorsports' eBay Store allows returns of any item, in new and unused condition with original packaging, within 30-days of receiving the item for a refund or exchange. Absolutely NO returns or exchanges allowed on products that have been used, installed, mounted, or missing components. All non-defective returns are subject to a 20% restocking fee. All returns must be accompanied by a Return Merchandise Authorization (RMA) number which can be obtained by contacting us. Any products returned without a Return Merchandise Authorization (RMA) number will be refused. Please contact us in the event you're not satisfied with your purchase as we are more than happy to work with you to ensure a positive experience.